这是本文档旧的修订版！
MIPI Camera Module
{wiki:mipi-camera-module:mipi_camera_module_pinout_mechanical.png?1400|15-Pin Pinout and Mechanical Drawing}
Overview
This MIPI camera module uses the SC2336 1/3-inch sensor and a 15-pin MIPI interface. The module is suitable for embedded vision, image capture, and CSI-based camera applications.
Key Parameters
| Category | Item | Value |
|---|---|---|
| Sensor | Sensor Type | SC2336, 1/3“ |
| Sensor | Resolution | 1920 x 1080 |
| Sensor | Analog Supply (AVDD) | 2.8 V |
| Sensor | I/O Supply (DOVDD) | 1.8 V |
| Sensor | Digital Supply (DVDD) | Not marked |
| Sensor | Sensor CRA | 12 deg |
| Lens | EFL | 2.80 mm |
| Lens | F Number | 2.2 |
| Lens | View Angle | D128 deg / H106 deg / V56 deg |
| Lens | TV Distortion | -20% |
| Lens | Composition | 4P + IR |
| Lens | Chief Ray Angle | < 21 deg |
| Lens | Filter | 650 nm |
Parameter Image
{wiki:mipi-camera-module:mipi_camera_module_specs.png?1000|Parameter Image}
15-Pin MIPI Pin Definition
| Pin | Signal |
|---|---|
| 1 | GND |
| 2 | MDN0 |
| 3 | MDP0 |
| 4 | GND |
| 5 | MDN1 |
| 6 | MDP1 |
| 7 | GND |
| 8 | MCN |
| 9 | MCP |
| 10 | GND |
| 11 | PWDN / LDO |
| 12 | GPIO / LED |
| 13 | SIO-SCL |
| 14 | SIO-SDA |
| 15 | +3.3V |
Mechanical Drawing
Key drawing information visible from the source image:
- 15-pin connector, 1.0 mm pitch
- PCB thickness: 1.0 mm
- Top-view width markings include 25 +- 0.2 mm and 21 +- 0.1 mm
- Lens housing reference size: 10 +- 0.1 mm
- Side-view overall height marking: 15.9 +- 0.2 mm
Software Reference
Notes
- The parameter table above is cleaned from the provided parameter image.
- The pinout and mechanical details are taken from the provided drawing image.
- If you want, this page can be extended later with init sequence, power-on timing, and adapter board notes.
评论