ESPHome Smart Light Bulb

Yaml File:

substitutions: name: “aiyato-rgbcw” friendly_name: “AiYaTo RGBCW” project_name: “doit.aiyato-rgbcw” project_version: “1.0.0” light_restore_mode: RESTORE_DEFAULT_ON color_interlock: 'true'

esphome: name: “${name}” name_add_mac_suffix: true project: name: “${project_name}” version: “${project_version}”

preferences: flash_write_interval: 1min

esp8266: board: esp8285 restore_from_flash: true

globals: - id: my_global_mode type: bool restore_value: no initial_value: 'true'

logger:

api:

ota: safe_mode: false

wifi: ap: {}

interval: - interval: 1s then: - lambda: |- static uint32_t cnt = 0; static int flag = 0; static ESPPreferenceObject pref = global_preferences→make_preference<uint32_t>(23332500UL, true); if¹⁾) { flag = 0; ESP.restart(); } if(cnt == 0){ cnt++; uint32_t val = 0; pref.load(&val); val+=1; pref.save(&val); global_preferences→sync(); if(val >= 3){ my_global_mode→value() = false; } }else if(cnt < 5){ cnt++; if(cnt == 5){ uint32_t val = 0; pref.save(&val); global_preferences→sync(); } } if(!my_global_mode→value()){ if(cnt == 1){ char a[] = “000000”; char b[] = “000000”; wifi_wificomponent→clear_sta(); wifi_wificomponent→save_wifi_sta(a, b); wifi::WiFiAP wifi_wifiap = wifi::WiFiAP(); wifi_wificomponent→set_ap(wifi_wifiap); wifi_wificomponent→set_ap_timeout(5000); flag = 1; rgbww_rgbwwlightoutput→set_color_interlock(false); } static int state = 0; auto call = id(my_light).turn_on(); call.set_transition_length(1000); call.set_brightness(1.0); if (state == 0) { call.set_rgb(1.0, 0.0, 0.0); call.set_cold_white(0.0); call.set_warm_white(0.0); } else if (state == 3) { call.set_rgb(0.0, 1.0, 0.0); } else if (state == 5) { call.set_rgb(0.0, 0.0, 1.0); } else if (state == 7) { call.set_color_brightness(0.0); call.set_cold_white(1.0); call.set_warm_white(0.0); } else if (state == 9) { call.set_cold_white(0.0); call.set_warm_white(1.0); } else if (state == 11) { call.set_color_brightness(1.0); call.set_rgb(0.0, 1.0, 0.0); call.set_cold_white(0.0); call.set_warm_white(0.0); } call.perform(); state += 1; if (state == 12) { my_global_mode→value() = true; } }

web_server: port: 80

captive_portal:

binary_sensor: - platform: status name: “${friendly_name} Status”

sensor: - platform: uptime update_interval: 60s name: “${friendly_name} Uptime”

button: - platform: restart name: “${friendly_name} Restart”

output: - platform: esp8266_pwm id: red_output pin: GPIO12 - platform: esp8266_pwm id: green_output pin: GPIO14 - platform: esp8266_pwm id: blue_output pin: GPIO5 - platform: esp8266_pwm id: cold_white_output pin: GPIO4 - platform: esp8266_pwm id: warm_white_output pin: GPIO13

light: - platform: rgbww name: “${friendly_name}” restore_mode: “${light_restore_mode}” red: red_output green: green_output blue: blue_output cold_white: cold_white_output warm_white: warm_white_output cold_white_color_temperature: 6000 K warm_white_color_temperature: 3000 K color_interlock: “${color_interlock}” id: my_light

text_sensor: - platform: wifi_info ip_address: name: “${friendly_name} IP Address” disabled_by_default: true