差别

这里会显示出您选择的修订版和当前版本之间的差别。

--- developmentboard:esp32-c3mini [2023/09/02 08:39] – admin12
+++ developmentboard:esp32-c3mini [2023/09/02 08:52] (当前版本) – admin12
@@ 行 23: / 行 23: @@
 ==== Schematic ====
-{{https://www.nologo.tech/assets/img/esp32/esp32c3supermini/esp32c3schematicdiagram.png?nolink&|原理图}}原理图
+{{https://www.nologo.tech/assets/img/esp32/esp32c3supermini/esp32c3schematicdiagram.png?nolink&|原理图}}schematic diagram
-===== # 外接电源 =====
+===== external power supply =====
-如果需要外部供电只需将外部电源+级接入5V的位置，GND接负极。（支持3.3～6V电源）。切记连接外部电源的时候，无法接入USB，USB和外部供电只能选择一个。
+If external power supply is required, just connect the + stage of the external power supply to the 5V position and GND to the negative pole. (support 3.3 ~ 6V power supply). Remember that when connecting to an external power supply, USB cannot be connected, and you can only choose between USB and external power supply.
-注意
+Notice
-焊接时请注意不要使正负极短路，烧坏电池和设备。
+When welding, please be careful not to short-circuit the positive and negative poles, which may burn the battery and equipment.
-===== # WIFI天线 =====
+===== WIFIANTENNA =====
-如果想使用外置天线，可以按照一下图片外接外置天线。
+If you want to use an external antenna, you can connect an external antenna according to the picture below.
 {{https://www.nologo.tech/assets/img/esp32/esp32c3supermini/esp32c31.png?nolink&}}
-===== # 入门 =====
+===== getting Started =====
-==== # 硬件设置 ====
+==== Hardware settings ====
-您需要准备以下内容：
+You need to prepare the following:
   *
- 个ESP32C3SuperMini
+ESP32C3SuperMini
   *
- 台电脑
+ computer
   *
- 根 USB Type-C数据线
+ x USB Type-C data cable
-提示
+hint
-有些USB线只能供电，不能传输数据。如果您没有 USB 线或者不知道您的 USB 线是否可以传输数据，可以购买[[https://item.taobao.com/item.htm?spm=a1z10.3-c-s.w4002-24438210134.9.24866ea30WLxAl&id=679700862802|Type-c数据线open in new window]]
+Some USB cables can only provide power and cannot transfer data. If you don't have a USB cable or don't know if your USB cable can transfer data, you can buy a Type-c cableopen in new window
-  * 步骤 1.通过USB Type-C数据线将ESP32C3SuperMini连接到计算机
+  * Step 1. Connect ESP32C3SuperMini to computer via USB Type-C data cable
 {{https://www.nologo.tech/assets/img/esp32/esp32c3supermini/usbconnect.png?nolink&300x400}}
-==== # 软件设置 ====
+==== Software settings ====
-  * 步骤1.根据您的操作系统下载并安装最新版本的Arduino IDE
+  * Step 1. Download and install the latest version of Arduino IDE according to your operating system
 [[https://www.arduino.cc/en/software|{{https://www.nologo.tech/assets/img/arduino/other/ArduinoIDE.png?nolink&}}open in new window]]
-如果下载缓慢可以在国内Arduino社区下载[[https://arduino.me/download|ArduinoIDE下载地址open in new window]]
+If the download is slow, you can download it in the domestic Arduino community[[https://arduino.me/download|ArduinoIDEDownload addressopen in new window]]
   *
-步骤 2.启动 Arduino 应用程序
+Step 2. Launch the Arduino application
   *
-步骤 3.将 ESP32 板包添加到 Arduino IDE
+Step 3. Add the ESP32 board package to the Arduino IDE
-导航到File > Preferences ，然后使用以下 url 填写“Additional Boards Manager URL” ：
+Navigate to File > Preferences and fill in the "Additional Boards Manager URL" with the following url:
 [[https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json|https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json]]
@@ 行 87: / 行 87: @@
 {{https://www.nologo.tech/assets/img/arduino/other/add_board.png?nolink&500x310}}
-导航到Tools > Board > Boards Manager… ，在搜索框中输入关键字“ esp32 ”，选择最新版本的esp32并安装它。
+Navigate to Tools > Board > Boards Manager…, enter the keyword "esp32" in the search box, select the latest version of esp32 and install it.
 {{https://www.nologo.tech/assets/img/esp32/esp32c3supermini/add_esp32c3.png?nolink&500x310}}
-导航到工具 > 开发板 > ESP32 Arduino并选择“ ESP32C3 Dev Module ”。板的列表有点长，你需要滚动到底部才能到达它。
+Navigate to Tools > Development Boards > ESP32 Arduino and select "ESP32C3 Dev Module". The list of boards is a bit long and you need to scroll to the bottom to get to it.
 {{https://www.nologo.tech/assets/img/esp32/esp32c3supermini/selectboard.png?nolink&500x310}}
-导航到“工具”>“端口”，然后选择所连接的 ESP32C3SuperMini 的串口名称。这可能是 COM3 或更高版本（COM1和COM2通常保留用于硬件串行端口）。
+Navigate to Tools > Ports and select the serial port name of the connected ESP32C3SuperMini. This is probably COM3 or higher (COM1 and COM2 are usually reserved for hardware serial ports).
-==== # 闪烁的LED ====
+==== flashing LED ====
-步骤1.将以下代码复制到Arduino IDE
+Step 1. Copy the following code to Arduino IDE
 <code>
@@ 行 121: / 行 121: @@
 </code>
-上传后，您将看到板子上的LED 闪烁，每次闪烁之间有 1 秒的延迟。
+Once uploaded, you will see the LED on the board blink with a 1 second delay between each blink.
-===== # Micropython =====
+===== Micropython =====