Tuya 6-Way Power Controller

Rail type multifunctional power control host

6-channel relay (ZIGBEE/WIFI optional), can communicate with gateway or cloud to control power to various peripheral devices. Suitable for controlling light switches, electric screen lifting, electric curtain opening/closing, and providing power control for projectors, cameras, conference systems and other equipment.

The panel provides manual buttons and LED status indicators, supporting channel on/off control via body buttons. LED indicators show the current working status of each channel.

1. Total of 6 channels, each channel is a 16A relay.
2. The status of the 6-channel switch can be displayed by the panel LED indicator lights.
3. By using panel button switches, individual channel switching functions can be achieved.
4. Provide a special node control interface (linked with hotel card insertion and power retrieval/energy-saving modules).
5. Provide 6 independent node control interfaces (K1~K6), which can be connected to external buttons or the central control system to perform separate switch operations on channel switches.
6. Provide three power outage recovery modes:
   1. Power Off Mode
   2. Power On Mode
   3. Memory Mode
7. Two antenna versions available: Built-in antenna / External antenna.

The 6-way power controller provides:

1. Power input terminals: L/N/PE
2. 6 channel outputs (L1~L6): Each supports max 16A
3. K1~K6 external input interface: Can be connected to external switches or central control systems
4. RS485 interface: For communication with central control or smart home systems
5. DIY custom input interface

1. Power Off Mode: All channels remain OFF after power recovery
2. Power On Mode: All channels turn ON after power recovery
3. Memory Mode: Each channel restores to its state before power outage

Refer to the wiring diagrams below for proper installation:

Wiring Scheme A (AC 220V):

1. Input: L/N/PE
2. Output: L1~L6 connected to loads (lamps, appliances, etc.)
3. K1~K6: External switch inputs
4. ALL: Master switch
5. RS485: A/B for communication

Wiring Scheme B (DC 12V):

1. Input: GND + 12V
2. L as common terminal
3. L1~L6: Output terminals

1. Power on the device.
2. Press and hold the distribution network button until the RST LED flashes.
3. Open Tuya Smart App, click "+" → "Add Device".
4. Select the corresponding product category and follow the App instructions to complete pairing.

tuya-6relay_manual_en_p6-10.pdf