SCH

1.esp32-c6-msensor_schematic.zip

Software

2.esp32-c6-msensor_demo.zip

Zigbee firmware for ESP32 C6 based multi-functional air quality sensor

• Almost all values use standard clusters (so it will work on any system)
• Configurable reporting
• OTA update possible
• SCD40 gets pressure data from BMP280 for more accurate readings
• All sensors read every 10 seconds

If you don't need some value - go to reporting tab and set
Min rep interval, Max rep interval to 65534 and Min rep change to 0

https://github.com/xyzroe/Q_sensor

Thanks to xyzroe for writing the open source code