差别

这里会显示出您选择的修订版和当前版本之间的差别。

--- developmentboard:tuya-6realy [2026/05/13 04:24] – Rewrite in pure English, proper DokuWiki syntax admin
+++ developmentboard:tuya-6realy [2026/05/13 06:21] (当前版本) – admin
@@ 行 26: / 行 26: @@
 === Panel Section ===
-| Item | Description |
+|Item|Description|
-|------|-------------|
+|——|————-|
-| RST LED | Flashes when device enters distribution network state |
+|RST LED|Flashes when device enters distribution network state|
-| Channel LEDs (1~6) | Solid ON when channel is on; OFF when channel is off |
+|Channel LEDs (1~6)|Solid ON when channel is on; OFF when channel is off|
-| Buttons 1~6 | Press to toggle the corresponding relay on/off state |
+|Buttons 1~6|Press to toggle the corresponding relay on/off state|
-| Distribution Network Button | For pairing with gateway/cloud |
+|Distribution Network Button|For pairing with gateway/cloud|
-| POW LED | Power status indicator |
+|POW LED|Power status indicator|
 === Interface Part - Power & Output ===
@@ 行 43: / 行 43: @@
   - **RS485 interface**: For communication with central control or smart home systems
   - **DIY custom input interface**
 ===== Power Outage Recovery Modes =====
@@ 行 49: / 行 48: @@
   - **Power On Mode**: All channels turn ON after power recovery
   - **Memory Mode**: Each channel restores to its state before power outage
 ===== Installation & Wiring =====
@@ 行 55: / 行 53: @@
 **Wiring Scheme A (AC 220V)**:
   - Input: L/N/PE
   - Output: L1~L6 connected to loads (lamps, appliances, etc.)
@@ 行 62: / 行 61: @@
 **Wiring Scheme B (DC 12V)**:
   - Input: GND + 12V
   - L as common terminal
   - L1~L6: Output terminals
-{{developmentboard:tuya-6relay_wiring_p1.png?direct&600|Wiring Diagram Page 1}}
+{{:developmentboard:tuya-6relay_wiring_p1.png?direct&600|Wiring Diagram Page 1}}{{:developmentboard:tuya-6relay_wiring_p2.png?direct&600|Wiring Diagram Page 2}}
-{{developmentboard:tuya-6relay_wiring_p2.png?direct&600|Wiring Diagram Page 2}}
 ===== Tuya Smart App Pairing =====
+<code>
+. Power on the device.
+. Press and hold the distribution network button until the RST LED flashes.
+. Open Tuya Smart App, click "+" → "Add Device".
+. Select the corresponding product category and follow the App instructions to complete pairing.
-. Power on the device.
+</code>
-. Press and hold the distribution network button until the RST LED flashes.
-. Open Tuya Smart App, click "+" → "Add Device".
-. Select the corresponding product category and follow the App instructions to complete pairing.
 ===== Specifications =====
-| Item | Parameter |
+|Item|Parameter|
-|------|-----------|
+|——|———–|
-| Input Voltage | AC 90~250V |
+|Input Voltage|AC 90~250V|
-| Max Load per Channel | 16A |
+|Max Load per Channel|16A|
-| Relay Life | ≥ 100,000 times |
+|Relay Life|≥ 100,000 times|
-| Communication | ZigBee / Wi-Fi (optional) |
+|Communication|ZigBee / Wi-Fi (optional)|
-| Operating Temperature | -20°C ~ 60°C |
+|Operating Temperature|-20°C ~ 60°C|
-| Humidity | 5% ~ 95% RH (non-condensing) |
+|Humidity|5% ~ 95% RH (non-condensing)|
-| Dimensions | 145 × 90 × 40 mm |
+|Dimensions|145 × 90 × 40 mm|
-| Installation | DIN rail mounting |
+|Installation|DIN rail mounting|
 ===== Downloads =====
-{{developmentboard:tuya-6relay_manual_en.pdf|📄 Download English Manual (PDF)}}
+{{:developmentboard:tuya-6relay_manual_en_p6-10.pdf|tuya-6relay_manual_en_p6-10.pdf}}
-{{developmentboard:tuya-6relay_wiring_diagram.pdf|📄 Download Wiring Diagram (PDF)}}
-~~CONTENT BELOW IS AUTO-GENERATED, DO NOT MODIFY!~~
-<html>
-<meta name="viewport" content="width=device-width, initial-scale=1.0">
-</html>