差别

这里会显示出您选择的修订版和当前版本之间的差别。

--- developmentboard:tuya-6realy [2026/05/13 04:12] – admin
+++ developmentboard:tuya-6realy [2026/05/13 06:21] (当前版本) – admin
@@ 行 1: / 行 1: @@
-<h1 class="page-header pb-3 mb-4 mt-0"><svg viewBox="0 0 24 24" xmlns="http://www.w3.org/2000/svg" width="1em" height="1em" role="presentation" class="iconify mr-2"><path d="M13 9h5.5L13 3.5V9M6 2h8l6 6v12a2 2 0 0 1-2 2H6a2 2 0 0 1-2-2V4c0-1.11.89-2 2-2m9 16v-2H6v2h9m3-4v-2H6v2h12z"/></svg> Tuya 6路电源控制器 (6-Way Power Controller)</h1>
+====== Tuya 6-Way Power Controller ======
-<div class="level1">
-<p>
+Rail type multifunctional power control host
-导轨式多功能电源控制主机 | Rail type multifunctional power control host
-</p>
-</div>
+===== Function Overview =====
-<h2 class="page-header pb-3 mb-4 mt-0">功能概述 | Function Overview</h2>
+-channel relay (ZIGBEE/WIFI optional), can communicate with gateway or cloud to control power to various peripheral devices. Suitable for controlling light switches, electric screen lifting, electric curtain opening/closing, and providing power control for projectors, cameras, conference systems and other equipment.
-<div class="level2">
-<p>
+The panel provides manual buttons and LED status indicators, supporting channel on/off control via body buttons. LED indicators show the current working status of each channel.
-路继电器（ZIGBEE/WIFI可选），可与网关或云端通信实现对多种周边设备电源的控制。适用于控制灯光开关、电动屏幕升降、电动窗帘开合，以及给投影机、摄像机、会议系统等设备提供电源控制。
-</p>
-<p>
+===== Key Features =====
-面板提供手动按键及 LED 状态指示灯，支持通过机身按键控制各路开关，LED 指示灯显示当前通道工作状态。
-</p>
-</div>
+  - Total of 6 channels, each channel is a 16A relay.
+  - The status of the 6-channel switch can be displayed by the panel LED indicator lights.
+  - By using panel button switches, individual channel switching functions can be achieved.
+  - Provide a special node control interface (linked with hotel card insertion and power retrieval/energy-saving modules).
+  - Provide 6 independent node control interfaces (K1~K6), which can be connected to external buttons or the central control system to perform separate switch operations on channel switches.
+  - Provide three power outage recovery modes:
+      - **Power Off Mode**
+      - **Power On Mode**
+      - **Memory Mode**
+  - Two antenna versions available: Built-in antenna / External antenna.
-<h2 class="page-header pb-3 mb-4 mt-0">产品特性 | Key Features</h2>
+===== Button & Interface Description =====
-<div class="level2">
-<ol>
-<li>Total of 6 channels, each channel is a 16A relay.</li>
-<li>The status of the 6-channel switch can be displayed by the panel LED indicator lights.</li>
-<li>By using panel button switches, individual channel switching functions can be achieved.</li>
-<li>Provide a special node control interface (linked with hotel card insertion and power retrieval/energy-saving modules).</li>
-<li>Provide 6 independent node control interfaces (K1-K6), which can be connected to external buttons or the central control system to perform separate switch operations on channel switches.</li>
-<li>Provide three power outage recovery modes:
-  <ul>
-  <li><strong>Power Off Mode</strong></li>
-  <li><strong>Power On Mode</strong></li>
-  <li><strong>Memory Mode</strong></li>
-  </ul>
-</li>
-<li>Two antenna versions available: Built-in antenna / External antenna.</li>
-</ol>
-</div>
-<h2 class="page-header pb-3 mb-4 mt-0">接口说明 | Button & Interface Description</h2>
+=== Panel Section ===
-<div class="level2">
-<h3>Panel Section</h3>
+|Item|Description|
-<table class="inline">
+|——|————-|
-<tr><th>Item</th><th>Description</th></tr>
+|RST LED|Flashes when device enters distribution network state|
-<tr><td>RST LED</td><td>Flashes when device enters distribution network state</td></tr>
+|Channel LEDs (1~6)|Solid ON when channel is on; OFF when channel is off|
-<tr><td>Channel LEDs (1~6)</td><td>Solid ON when channel is on; OFF when channel is off</td></tr>
+|Buttons 1~6|Press to toggle the corresponding relay on/off state|
-<tr><td>Buttons 1~6</td><td>Press to toggle the corresponding relay on/off state</td></tr>
+|Distribution Network Button|For pairing with gateway/cloud|
-<tr><td>Distribution Network Button</td><td>For pairing with gateway/cloud</td></tr>
+|POW LED|Power status indicator|
-<tr><td>POW LED</td><td>Power status indicator</td></tr>
-</table>
-<h3>Interface Part - Power & Output</h3>
+=== Interface Part - Power & Output ===
-<table class="inline">
-<tr><th>Terminal</th><th>Description</th></tr>
-<tr><td>12V / G</td><td>12-24V DC power input interface</td></tr>
-<tr><td>L / N</td><td>AC 100~250V working power input: L = Live wire input, N = Neutral line input</td></tr>
-<tr><td>L1 ~ L6</td><td>220V/16A external equipment power output terminals<br/>Supports 2 modes:<br/>• When powered by 12V-24V: L is common terminal, L1-L6 are output terminals<br/>• When powered by 100V-250V: L1-L6 output 100V-250V AC</td></tr>
-</table>
-<h3>Interface Part - Control Input</h3>
+The 6-way power controller provides:
-<table class="inline">
-<tr><th>Terminal</th><th>Description</th></tr>
-<tr><td>K1 ~ K6</td><td>External input interfaces for switches or central control system<br/><em>Note: K1-K6 have three states:</em><br/>1. Reset switch mode: only short-circuit is effective<br/>2. Rocker switch mode: both short-circuit and disconnection are effective<br/>3. Weak current switch mode: short-circuit = open action, disconnection = close action</td></tr>
-<tr><td>DIY</td><td>Custom input interface (used in conjunction with gateway)</td></tr>
-<tr><td>COM / B / A</td><td>RS485 interface</td></tr>
-<tr><td>ALL</td><td>All-on / All-off control input</td></tr>
-</table>
-</div>
-<h2 class="page-header pb-3 mb-4 mt-0">电气参数 | Electrical Specifications</h2>
+  - **Power input terminals**: L/N/PE
-<div class="level2">
+  - **6 channel outputs (L1~L6)**: Each supports max 16A
-<table class="inline">
+  - **K1~K6 external input interface**: Can be connected to external switches or central control systems
-<tr><th>Parameter</th><th>Specification</th></tr>
+  - **RS485 interface**: For communication with central control or smart home systems
-<tr><td>Working Voltage</td><td>AC 100~250V / DC 12~24V</td></tr>
+  - **DIY custom input interface**
-<tr><td>Channels</td><td>6 channels x 16A relay each</td></tr>
+===== Power Outage Recovery Modes =====
-<tr><td>Communication</td><td>ZigBee / WiFi (optional)</td></tr>
-<tr><td>External Inputs</td><td>K1~K6 + DIY + ALL + RS485</td></tr>
-<tr><td>Indicators</td><td>POW LED + 6 Channel LEDs + RST LED</td></tr>
-<tr><td>Antenna</td><td>Built-in / External version options</td></tr>
-</table>
-</div>
-<h2 class="page-header pb-3 mb-4 mt-0">接线图 | Wiring Diagram</h2>
+  - **Power Off Mode**: All channels remain OFF after power recovery
-<div class="level2">
+  - **Power On Mode**: All channels turn ON after power recovery
+  - **Memory Mode**: Each channel restores to its state before power outage
+===== Installation & Wiring =====
-<h3>Wiring Scheme A — AC 220V Power Supply</h3>
+Refer to the wiring diagrams below for proper installation:
-<p>This scheme uses AC mains power (100~250V) as the power source:</p>
-<table class="inline">
-<tr><th>Connection</th><th>Terminal</th><th>Description</th></tr>
-<tr><td>Live Wire (L)</td><td>L</td><td>Connect to live wire from mains</td></tr>
-<tr><td>Neutral (N)</td><td>N</td><td>Connect to neutral wire from mains</td></tr>
-<tr><td>Output 1~6</td><td>L1 ~ L6</td><td>Connect to 6 lamps/equipment (each via relay)</td></tr>
-<tr><td>Switch 1~6</td><td>K1 ~ K6</td><td>External momentary switches for individual channel control</td></tr>
-<tr><td>All On/Off</td><td>ALL</td><td>External switch for master on/off control</td></tr>
-<tr><td>RS485</td><td>COM / B / A</td><td>RS485 communication interface</td></tr>
-<tr><td>12V / G</td><td>—</td><td>Not used in AC mode</td></tr>
-</table>
-<h3>Wiring Scheme B — DC 12V Power Supply</h3>
+**Wiring Scheme A (AC 220V)**:
-<p>This scheme uses DC 12V external power supply:</p>
-<table class="inline">
-<tr><th>Connection</th><th>Terminal</th><th>Description</th></tr>
-<tr><td>DC Power (+)</td><td>12V</td><td>Connect to DC 12V positive rail</td></tr>
-<tr><td>DC Ground</td><td>G</td><td>Connect to DC ground/common</td></tr>
-<tr><td>Common Terminal</td><td>L</td><td>In DC mode, L acts as common terminal</td></tr>
-<tr><td>Output 1~6</td><td>L1 ~ L6</td><td>Connect to loads (switched outputs from common L)</td></tr>
-<tr><td>Switch 1~6</td><td>K1 ~ K6</td><td>External switches for channel control</td></tr>
-<tr><td>All On/Off</td><td>ALL</td><td>Master control switch</td></tr>
-<tr><td>RS485</td><td>COM / B / A</td><td>RS485 communication interface</td></tr>
-</table>
-</div>
-<h2 class="page-header pb-3 mb-4 mt-0">APP接入 | Tuya Smart APP Connection</h2>
+  - Input: L/N/PE
-<div class="level2">
+  - Output: L1~L6 connected to loads (lamps, appliances, etc.)
-<ol>
+  - K1~K6: External switch inputs
-<li>Scan the QR code to download and install <strong>Tuya Smart</strong> app (or search "Tuya Smart" in App Store / Google Play)</li>
+  - ALL: Master switch
-<li>Open the app and follow prompts to add device</li>
+  - RS485: A/B for communication
-<li><strong>For WiFi version:</strong> Ensure your phone is connected to a <strong>2.4GHz Wi-Fi network</strong> before adding</li>
-<li>Place your phone close to the gateway/device during pairing for smoother connection</li>
-</ol>
-<p><em>Note: Due to Tuya Smart APP updates, actual operation may differ slightly. Follow the instructions in the current app version.</em></p>
-</div>
-<h2 class="page-header pb-3 mb-4 mt-0">售后服务 | After-Sales Service & Warranty Policy</h2>
+**Wiring Scheme B (DC 12V)**:
-<div class="level2">
-<p>The after-sales service follows the Consumer Rights Protection Law and Product Quality Law of PRC:</p>
-<table class="inline">
-<tr><th>Service Type</th><th>Policy</th></tr>
-<tr><td>Return</td><td>Quality issues within 7 days from receipt — free return</td></tr>
-<tr><td>Exchange</td><td>Quality issues within 15 days from receipt — free exchange</td></tr>
-<tr><td>Maintenance</td><td>Product quality issues within 1 year from receipt — free maintenance</td></tr>
-</table>
-<p><em>Returns/exchanges/maintenance require invoice. For e-commerce purchases within 7-day no-reason return window, logistics cost is borne by user.</em></p>
-</div>
-<h2 class="page-header pb-3 mb-4 mt-0">产品版本 | Product Versions</h2>
+  - Input: GND + 12V
-<div class="level2">
+  - L as common terminal
-<ul>
+  - L1~L6: Output terminals
-<li><strong>Built-in Antenna Version</strong> — compact design with internal antenna</li>
-<li><strong>External Antenna Version</strong> — external antenna connector for better signal coverage</li>
-</ul>
-</div>
+{{:developmentboard:tuya-6relay_wiring_p1.png?direct&600|Wiring Diagram Page 1}}{{:developmentboard:tuya-6relay_wiring_p2.png?direct&600|Wiring Diagram Page 2}}
+===== Tuya Smart App Pairing =====
+<code>
-----
+. Power on the device.
+. Press and hold the distribution network button until the RST LED flashes.
+. Open Tuya Smart App, click "+" → "Add Device".
+. Select the corresponding product category and follow the App instructions to complete pairing.
-<h2 class="page-header pb-3 mb-4 mt-0">文档下载 | Downloads</h2>
+</code>
-<div class="level2">
-<ul>
+===== Specifications =====
-<li>📄 <a href="/lib/exe/fetch.php?media=developmentboard:tuya-6relay_manual_en.pdf" class="media" target="_blank">Tuya 6路电源控制器 - 英文说明书 (PDF)</a></li>
-<li>📄 <a href="/lib/exe/fetch.php?media=developmentboard:tuya-6relay_wiring_diagram.pdf" class="media" target="_blank">Tuya 6路电源控制器 - 接线图 (PDF)</a></li>
+|Item|Parameter|
-</ul>
+|——|———–|
+|Input Voltage|AC 90~250V|
+|Max Load per Channel|16A|
+|Relay Life|≥ 100,000 times|
+|Communication|ZigBee / Wi-Fi (optional)|
+|Operating Temperature|-20°C ~ 60°C|
+|Humidity|5% ~ 95% RH (non-condensing)|
+|Dimensions|145 × 90 × 40 mm|
+|Installation|DIN rail mounting|
+===== Downloads =====
+{{:developmentboard:tuya-6relay_manual_en_p6-10.pdf|tuya-6relay_manual_en_p6-10.pdf}}
-</div>