差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

两侧同时换到之前的修订记录 前一修订版
后一修订版		 前一修订版
developmentboard:esphome_smart_light_bulb [2024/11/30 02:05] – admindevelopmentboard:esphome_smart_light_bulb [2024/12/18 14:41] (当前版本) – admin
行 1: 行 1:
 ESPHome Smart Light Bulb ESPHome Smart Light Bulb
 +
 +Introduction – Detected by Home Assistant
 +
 +– Controlled by MQTT, Web UI, HTTP, etc
 +
 +– Using times, scripts, rules
 +
 +– Open source
 +
 +– Use ESP8285-2M as MCU
 +
 +Specification – RGB+C+W, 9W
 +
 +– 850LM
 +
 +– AC:100-265V, 50/60Hz
 +
 +– 2700-6500K
 +
 +– E26/E27
 +
 +– 60 x 60 x 125 mm
 +
 +– 40000 hours
 +
 +**GPIOs**
 +
 +GPIO4 – PWM1 – Cool WhiteGPIO5 – PWM4 – Blue ColorGPIO12 – PWM2 – Red Color GPIO13 – PWM5 – Warm WhiteGPIO14 – PWM3 – Green Color
  
 **Yaml File:** **Yaml File:**
行 75: 行 103:
 static ESPPreferenceObject pref = global_preferences→make_preference(23332500UL, true); static ESPPreferenceObject pref = global_preferences→make_preference(23332500UL, true);
  
-if((flag == 1) && (network::is_connected()))+if((flag == 1) && (network::is_connected( _FCKG_BLANK_TD_)) )
  
 { {
行 302: 行 330:
  
 disabled_by_default: true disabled_by_default: true
 +
 +{{:developmentboard:yaml.zip|yaml.zip}}
  
 ---- ----
  
  
  • developmentboard/esphome_smart_light_bulb.1732932324.txt.gz
  • 最后更改: 2024/11/30 02:05
  • 由 admin