差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

两侧同时换到之前的修订记录 前一修订版
developmentboard:esp32-s3-7.0inch_screen [2024/04/11 07:57] – admin12developmentboard:esp32-s3-7.0inch_screen [2024/04/11 11:42] (当前版本) – admin12
行 4: 行 4:
 ===== Table of contents ===== ===== Table of contents =====
  
-==== 一、Introduction ====+=== 一、Introduction ===
  
-==== 二、Installing using Arduino IDE ====+===   === 
 + 
 +=== 二、Installing using Arduino IDE === 
 + 
 +===   ===
  
-==== 三、sample program usage ====+=== 三、sample program usage ===
  
 ===== Getting Started ===== ===== Getting Started =====
行 118: 行 122:
  
 first program, the code bellow starts the Serial port and prints “hello from ESP32” every second. first program, the code bellow starts the Serial port and prints “hello from ESP32” every second.
- 
  <font 16px/inherit;;inherit;;inherit>**void setup() {**</font>  <font 16px/inherit;;inherit;;inherit>**void setup() {**</font>
- 
  <font 16px/inherit;;inherit;;inherit>**Serial.begin(115200);**</font>  <font 16px/inherit;;inherit;;inherit>**Serial.begin(115200);**</font>
- 
  <font 16px/inherit;;inherit;;inherit>**} **</font>  <font 16px/inherit;;inherit;;inherit>**} **</font>
- 
  <font 16px/inherit;;inherit;;inherit>**void loop() {**</font>  <font 16px/inherit;;inherit;;inherit>**void loop() {**</font>
- 
  <font 16px/inherit;;inherit;;inherit>**Serial.println("hello from ESP32");**</font>  <font 16px/inherit;;inherit;;inherit>**Serial.println("hello from ESP32");**</font>
- 
  <font 16px/inherit;;inherit;;inherit>**delay(1000);**</font>  <font 16px/inherit;;inherit;;inherit>**delay(1000);**</font>
- 
  <font 16px/inherit;;inherit;;inherit>**}**</font>  <font 16px/inherit;;inherit;;inherit>**}**</font>
  
  • developmentboard/esp32-s3-7.0inch_screen.1712822268.txt.gz
  • 最后更改: 2024/04/11 07:57
  • 由 admin12