差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

两侧同时换到之前的修订记录 前一修订版
后一修订版		 前一修订版
developmentboard:esp32-c6-multi-sensor [2024/07/11 16:04] – admindevelopmentboard:esp32-c6-multi-sensor [2024/11/08 06:50] (当前版本) – admin
行 1: 行 1:
-=====   ESP32-C6-multi-sensor    =====+===== ESP32-C6-multi-sensor =====
  
-=====   Picture   =====+===== Picture =====
  
 {{  :developmentboard:mmexport1720516209523.png  }} {{  :developmentboard:mmexport1720516209523.png  }}
行 12: 行 12:
  
 {{:developmentboard:2.esp32-c6-msensor_demo.zip|2.esp32-c6-msensor_demo.zip}} {{:developmentboard:2.esp32-c6-msensor_demo.zip|2.esp32-c6-msensor_demo.zip}}
 +
 +**Zigbee firmware for ESP32 C6 based multi-functional air quality sensor**
 +
 +   * Almost all values use standard clusters (so it will work on any system)
 +  * Configurable reporting
 +  * OTA update possible
 +  * SCD40 gets pressure data from BMP280 for more accurate readings
 +  * All sensors read every 10 seconds
 +
 +{{:developmentboard:z2m.png?600|}}
 +
 +If you don't need some value - go to reporting tab and set \\ ''Min rep interval'', ''Max rep interval''  to ''65534''  and ''Min rep change''  to ''0''
 +
 +[[https://github.com/xyzroe/Q_sensor|https://github.com/xyzroe/Q_sensor]]
 +
 +Thanks to xyzroe for writing the open source code
  
  
  • developmentboard/esp32-c6-multi-sensor.1720713855.txt.gz
  • 最后更改: 2024/07/11 16:04
  • 由 admin