差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

两侧同时换到之前的修订记录 前一修订版
后一修订版		 前一修订版
developmentboard:esp32-c6-multi-sensor [2024/07/11 16:03] – admindevelopmentboard:esp32-c6-multi-sensor [2024/11/08 06:50] (当前版本) – admin
行 1: 行 1:
-**====== ESP32-C6-multi-sensor ======**+===== ESP32-C6-multi-sensor =====
  
-**Picture**+===== Picture =====
  
-{{ :developmentboard:mmexport1720516209523.png |}}+{{  :developmentboard:mmexport1720516209523.png  }}
  
 **SCH** **SCH**
  
-{{ :developmentboard:1.esp32-c6-msensor_schematic.zip |}} +{{:developmentboard:1.esp32-c6-msensor_schematic.zip|1.esp32-c6-msensor_schematic.zip}}
  
 **Software** **Software**
  
-{{ :developmentboard:2.esp32-c6-msensor_demo.zip |}}+{{:developmentboard:2.esp32-c6-msensor_demo.zip|2.esp32-c6-msensor_demo.zip}} 
 + 
 +**Zigbee firmware for ESP32 C6 based multi-functional air quality sensor** 
 + 
 +   * Almost all values use standard clusters (so it will work on any system) 
 +  * Configurable reporting 
 +  * OTA update possible 
 +  * SCD40 gets pressure data from BMP280 for more accurate readings 
 +  * All sensors read every 10 seconds
  
 +{{:developmentboard:z2m.png?600|}}
  
 +If you don't need some value - go to reporting tab and set \\ ''Min rep interval'', ''Max rep interval''  to ''65534''  and ''Min rep change''  to ''0''
  
 +[[https://github.com/xyzroe/Q_sensor|https://github.com/xyzroe/Q_sensor]]
  
 +Thanks to xyzroe for writing the open source code
  
  
  • developmentboard/esp32-c6-multi-sensor.1720713813.txt.gz
  • 最后更改: 2024/07/11 16:03
  • 由 admin