差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

两侧同时换到之前的修订记录 前一修订版
后一修订版		 前一修订版
developmentboard:esp32-c6-multi-sensor [2024/07/11 15:59] – admindevelopmentboard:esp32-c6-multi-sensor [2024/11/08 06:50] (当前版本) – admin
行 1: 行 1:
-ESP32-C6-multi-sensor+===== ESP32-C6-multi-sensor =====
  
-**Picture**+===== Picture =====
  
-[[https://s2.loli.net/2024/07/10/LbI3kZz7CX4yT8F.png|https://s2.loli.net/2024/07/10/LbI3kZz7CX4yT8F.png]] +{{  :developmentboard:mmexport1720516209523.png  }}
- +
- +
-![2.jpg]([[https://s2.loli.net/2024/07/09/AbkQBMvpy7o9cnx.jpg|https://s2.loli.net/2024/07/09/AbkQBMvpy7o9cnx.jpg]])+
  
 **SCH** **SCH**
 +
 +{{:developmentboard:1.esp32-c6-msensor_schematic.zip|1.esp32-c6-msensor_schematic.zip}}
  
 **Software** **Software**
  
-**Data Sheet**+{{:developmentboard:2.esp32-c6-msensor_demo.zip|2.esp32-c6-msensor_demo.zip}} 
 + 
 +**Zigbee firmware for ESP32 C6 based multi-functional air quality sensor** 
 + 
 +   * Almost all values use standard clusters (so it will work on any system) 
 +  * Configurable reporting 
 +  * OTA update possible 
 +  * SCD40 gets pressure data from BMP280 for more accurate readings 
 +  * All sensors read every 10 seconds 
 + 
 +{{:developmentboard:z2m.png?600|}} 
 + 
 +If you don't need some value - go to reporting tab and set \\ ''Min rep interval'', ''Max rep interval''  to ''65534''  and ''Min rep change''  to ''0'' 
 + 
 +[[https://github.com/xyzroe/Q_sensor|https://github.com/xyzroe/Q_sensor]] 
 + 
 +Thanks to xyzroe for writing the open source code
  
  
  • developmentboard/esp32-c6-multi-sensor.1720713599.txt.gz
  • 最后更改: 2024/07/11 15:59
  • 由 admin