差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

两侧同时换到之前的修订记录 前一修订版
developmentboard:esp32-c5mini [2026/04/28 12:12] – Translate to English and remove firmware link admindevelopmentboard:esp32-c5mini [2026/04/28 12:12] (当前版本) – admin
行 4: 行 4:
  
 ===== Product Features ===== ===== Product Features =====
 +
   * **Chipset**: Integrated ESP32-C5, RISC-V 32-bit single-core processor   * **Chipset**: Integrated ESP32-C5, RISC-V 32-bit single-core processor
   * **Memory**: 320 KB ROM, 384 KB HP SRAM, 16 KB LP SRAM, 4MB Flash   * **Memory**: 320 KB ROM, 384 KB HP SRAM, 16 KB LP SRAM, 4MB Flash
行 11: 行 12:
   * **Peripherals**: GPIO, SPI, UART, I2C, I2S, PWM, ADC, USB Serial/JTAG, etc.   * **Peripherals**: GPIO, SPI, UART, I2C, I2S, PWM, ADC, USB Serial/JTAG, etc.
   * **Operating Temperature**: -40°C to +85°C   * **Operating Temperature**: -40°C to +85°C
- 
 ===== Block Diagram ===== ===== Block Diagram =====
-{{:developmentboard:esp32-c5-mini-block-diagram.png|}}+ 
 +{{:developmentboard:esp32-c5-mini-block-diagram.png}}
  
 ===== Pin Definition ===== ===== Pin Definition =====
-{{:developmentboard:esp32-c5-mini-pinout.png|}} 
  
-^ Pin ^ Name ^ Type ^ Function ^ +{{:developmentboard:esp32-c5-mini-pinout.png}} 
-| 1 | EN | I | Chip Enable (High: Enabled; Low: Shutdown) | + 
-| 2 | IO0 | I/O/T | GPIO0, XTAL_32K_P | +^Pin^Name^Type^Function| 
-| 3 | IO1 | I/O/T | GPIO1, XTAL_32K_N, ADC1_CH0 | +|1|EN|I|Chip Enable (High: Enabled; Low: Shutdown)| 
-| 4 | IO2 | I/O/T | MTMS, GPIO2, ADC1_CH1 | +|2|IO0|I/O/T|GPIO0, XTAL_32K_P| 
-| 5 | IO3 | I/O/T | MTDI, GPIO3, ADC1_CH2 | +|3|IO1|I/O/T|GPIO1, XTAL_32K_N, ADC1_CH0| 
-| 7 | RST | I | Reset (Active Low) | +|4|IO2|I/O/T|MTMS, GPIO2, ADC1_CH1| 
-| 8 | 3V3 | P | 3.3V Power Supply | +|5|IO3|I/O/T|MTDI, GPIO3, ADC1_CH2| 
-| 9 | GND | P | Ground | +|7|RST|I|Reset (Active Low)| 
-| 10 | VIN | P | 5V Input | +|8|3V3|P|3.3V Power Supply| 
-| 18 | RX | I/O/T | U0RXD, GPIO12 | +|9|GND|P|Ground| 
-| 19 | TX | I/O/T | U0TXD, GPIO11 |+|10|VIN|P|5V Input| 
 +|18|RX|I/O/T|U0RXD, GPIO12| 
 +|19|TX|I/O/T|U0TXD, GPIO11|
  
 ===== Dimensions ===== ===== Dimensions =====
-{{:developmentboard:esp32-c5-mini-dimension.png|}} + 
-Size: 17.5 mm * 28 mm * 4 mm+{{:developmentboard:esp32-c5-mini-dimension.png}}Size: 17.5 mm * 28 mm * 4 mm
  
 ===== Schematic ===== ===== Schematic =====
-{{:developmentboard:esp32-c5-mini-schematic.png|}}+ 
 +{{:developmentboard:esp32-c5-mini-schematic.png}} 
 **Note**: The operating voltage is DC 3.0V-3.6V (3.3V recommended). **Note**: The operating voltage is DC 3.0V-3.6V (3.3V recommended).
  
 ===== Applications ===== ===== Applications =====
 +
   * Smart Home, Smart Buildings, Smart Lighting   * Smart Home, Smart Buildings, Smart Lighting
   * Industrial Wireless Control, Wearable Electronics   * Industrial Wireless Control, Wearable Electronics
   * Wireless Location Awareness and Beacons   * Wireless Location Awareness and Beacons
   * Baby Monitors and Network Cameras   * Baby Monitors and Network Cameras
 +
 +
  • developmentboard/esp32-c5mini.txt
  • 最后更改: 2026/04/28 12:12
  • 由 admin